beautypg.com

HP mp2220 Digital Projector User Manual

Page 43

background image

Performing routine maintenance

43

5.

Loosen the two screws

2

on the lamp module, and pull out the module

3

.

6.

Insert the new lamp module into the projector and tighten the two screws.

7.

Install the cover and tighten the two screws.

8.

Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling

the lamp.

9.

Press enter, go to Setup > Reset lamp hours, and press enter.

See also other documents in the category HP Projectors: