HP mp2220 Digital Projector - Manual (Page 38)

Adjusting the Projector 38
Picture menu
Some picture adjustments are available only when certain input ports are in use. Unavailable
adjustments are shown in gray in the on-screen menu.
Picture menu
Color settings... Adjusts the picture and colors.
Brightness Brightens or darkens the picture.
Contrast Sets the difference between light and dark areas.
Sharpness Sharpens or softens the picture.
Color saturation Adjusts the intensity of colors.
Tint Shifts colors toward red or green.
Color space Selects the color standard used by the source.
Reset color settings Restores these color settings to the default settings.
VGA settings... Adjusts settings for a computer input.
Auto-sync Resynchronizes the projector to the input signal. This can compensate for
any change in the signal.
Frequency Adjusts the timing of the projector relative to the computer.
Tracking Adjusts the phase of the projector relative to the computer.
Vertical offset Adjusts the picture up or down within the projection area.
Horizontal offset Adjusts the picture left or right within the projection area.
Picture mode Adjusts color and picture settings to one of several combinations designed
for different types of viewing situations. You can use a different picture
mode for each source or each viewing environment. You can also customize
each picture mode.
Customize picture mode... Changes settings associated with the current picture mode.
Picture enhancement Refines the color, lightness, and other characteristics of the picture.
White intensity Increases the brightness of white areas.
Color temperature Shifts color toward red or blue.