Reset device access – HP Deskjet 995c Printer User Manual

Page 80

3. Click the

Change PIN Code

button.

The Change PIN Code dialog box appears.

4. Enter the new PIN Code.

The default PIN Code is

5. Re-enter the new PIN code.

6. Click

The PIN code is changed.

reset device access

In order to change the printer’s wireless settings you must connect the printer to your
computer with a USB cable. Follow these steps to clear all bonded devices from the
printer’s memory:

1. Open the Toolbox, then open the Configure Wireless Settings dialog box.

2. Click the

Reset Device Access

button.

A warning dialog box appears.

3. Click

to close the warning dialog box.

All bonded devices are removed from the printer’s memory.

reset to factory defaults

Follow these steps to reset the printer to the factory default settings:

1. Press and hold down the

Power

button.

2. While holding down the

Power

button, tap the

Cancel (X)

button 4 times, then

tap the

Resume

button 4 times.

3. Release the

Power

button.