Bonding, Encryption required – HP Deskjet 995c Printer User Manual
Page 74
71
•
You can put the printer in a temporary Public Mode by pressing and holding
down the
Power
button until the Bluetooth LED light flashes. The printer returns to
Private Mode after 1 minute.
encryption required
The printer can be set to require encryption when it receives data over a Bluetooth
wireless connection.
When the Ecryption Required option is selected, the printer requires that:
•
All data sent over a Bluetooth wireless connection is encrypted.
•
All users must enter a
the first time they print.
authentication required
Authentication provides a way of verifying a Bluetooth device. Authentication is
automatically enabled when Encryption Required is checked on the
bonding
When a printer and a sending device bond, they store each other’s Bluetooth device
address.
This allows the device to discover the printer in
limit of 32
The printer can only bond to 32 devices at any one time.
If the printer is bonded to 32 devices and you want to bond to another device, you
must clear all the previously bonded devices from the printer’s memory.
For instructions on clearing previously bonded devices from the printer’s memory,
see
on page 77.
list of bonded devices
To see a list of devices bonded to the printer, print a
(see page 69).
All devices must send a
the first time they print when
Encryption Required is selected.