HP SAN Virtualization Services Platform - Manual (Page 21)

6. Verify that a _setup_.fdb database file was created.
7. Start the Demo Mode program and verify that all the components you specified were created.
To modify the current setup database
1. Stop the Demo Mode program.
2. Open a command window and change the directory ( CD command) to C:\Program Files\
Hewlett-Packard\SVSP\Core .
3. Run the command to add or delete a component.
For example, the following command adds an HBA to a host: Dbinit.exe _setup_ add
hba 1809200707070717 -v HostVendor -t host Host 3 . For a detailed description
on using the dbinit.exe command, see “ How to use DBINIT ” on page 27.
4. Start the Demo Mode program.
5. Verify the modifications made.
SAN Virtualization Services Platform 3.0.2 Virtualization Services Manager Demo Mode User
Guide 21