HP SAN Virtualization Services Platform - Manual (Page 13)

3 Using VSM Demo Mode program
By default, the Demo Mode program comes with a default setup database, so there is no need for
extra setup steps after the installation is completed. The Demo Mode program can be used immediately.
Starting the Demo Mode program
1.
Double-click the VSM icon in the system tray.
2. Click the Demo Mode tab, and then click the Start button. During the Demo Mode startup process,
a minimized command window is displayed.
IMPORTANT:
Do not close the command window or else the Demo Mode program will terminate.
SAN Virtualization Services Platform 3.0.2 Virtualization Services Manager Demo Mode User
Guide 13