HP Surestore 6164 Switch - Manual (Page 15)

Zoning User’s Guide 3-3
Using Zoning
3
Saved This is the zone configuration that was last saved. It resides in flash memory
and it is persistent.
In Figure 3-1, the defined and effective configurations are saved to flash:
Figure 3-1 Enabling a Zone Configuration
In Figure 3-2, Config 5 is defined (created). When it is defined, it resides only in RAM. To
permanently store the new configuration and make it accessible across reboots, it must be saved to
flash memory.
This can be accomplished by:
• Saving it directly to flash (the recommended method). This saves the defined and effective
configurations to flash. If there is no effective configuration, saving it will not enable a
configuration. To save a configuration, use the cfgSave command.
•
Enabling it. This saves the defined and effective configurations to flash. To enable a
configuration, use the cfgEnable command.
Defined Effective Disabled Saved
Config 1
Config 2
Config 3
Config 4
Defined
Config 1
Config 1
Config 2
Config 3
Config 4
Effective
Config 5
Config 1
Save Path
Disable Path
Enable Path
Config 5