HP ProLiant DL580 G4 Server - Manual (Page 94)

Server software and configuration utilities 94
• From within HP Insight Diagnostics (on page 93 )
For more information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack.
Array Diagnostic Utility
The HP Array Diagnostics Utility is a web-based application that creates a report of all HP storage
controllers and disk drives. This report provides vital information to assist in identifying faults or conditions
that may require attention. ADU can be accessed from the SmartStart CD ("
SmartStart software " on page
86 ) or downloaded from the HP website ( http://www.hp.com ).
Remote support and analysis tools
HP Instant Support Enterprise Edition
ISEE is a proactive remote monitoring and diagnostic tool to help manage your systems and devices, a
feature of HP support. ISEE provides continuous hardware event monitoring and automated notification to
identify and prevent potential critical problems. Through remote diagnostic scripts and vital system
configuration information collected about your systems, ISEE enables fast restoration of your systems.
Install ISEE on your systems to help mitigate risk and prevent potential critical problems.
For more information on ISEE, refer to the HP website
( http://www.hp.com/hps/hardware/hw_enterprise.html ).
To download HP ISEE, visit the HP website ( http://www.hp.com/hps/hardware/hw_downloads.html ).
For installation information, refer to the HP ISEE Client Installation and Upgrade Guide
( ftp://ftp.hp.com/pub/services/hardware/info/isee_client.pdf ).
Keeping the system current
Drivers
The server includes new hardware that may not have driver support on all operating system installation
media.
If you are installing a SmartStart-supported operating system, use the SmartStart software (on page
86 )
and its Assisted Path feature to install the operating system and latest driver support.
NOTE: If you are installing drivers from the SmartStart CD or the Software Maintenance CD,
refer to the SmartStart website ( http://www.hp.com/servers/smartstart ) to be sure that you are
using the latest version of SmartStart. For more information, refer to the documentation
provided with the SmartStart CD.
If you do not use the SmartStart CD to install an operating system, drivers for some of the new hardware
are required. These drivers, as well as other option drivers, ROM images, and value-add software can be
downloaded from the HP website ( http://www.hp.com/support ).
IMPORTANT: Always perform a backup before installing or updating device drivers.