HP ProLiant DL580 G4 Server - Manual (Page 65)

Expansion board options 65
4. Open the latch, and remove the expansion slot cover.
5. Unlock the retaining clip (for full-length expansion boards), and install the PCI-X Hot Plug expansion
board.
6. Lock the retaining clip (for full-length expansion boards), and close the latch.
7. Connect any required internal or external cables to the expansion board.
8. Press the PCI-X Hot Plug button, and wait for the power LED to illuminate green without flashing.
9. Replace the access panel, and resume normal server operations.
Removing a PCI-X Hot Plug expansion board
1. Extend or remove the server from the rack (" Extending the server from the rack " on page 24 ).
2. Remove the access panel (" Removing the access panel " on page 26 ).
3. Press the PCI-X Hot Plug button to remove power from the slot. When the green power LED on the
slot stops flashing, power has been removed from the slot.