Removing the access panel – HP ProLiant DL580 G4 Server User Manual

Page 26

Server operations 26

After performing the installation or maintenance procedure, slide the server back into the rack by

pressing the server rail-release latches.

Removing the access panel

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airflow and improper cooling that can

lead to thermal damage.

IMPORTANT:

When removing the access panel to view the Systems Insight Display LEDs (on

page

), leave the server powered on. The Systems Insight Display LEDs are cleared when

the server is powered off.

Extend the server from the rack, if applicable ("

If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.

NOTE:

The T-15 Torx screwdriver is shipped with the server and can be located on the rear

panel ("