HP ProLiant ML115 Server - Manual (Page 56)

52 MediaShield User’s Guide – Version 1.0
C HAPTER 5
MediaShield RAID Frequently Asked Questions
Dedicated Disk Questions
• Can I assign a dedicated disk to a striped array/JBOD or use a free disk with striped
array/JBOD?
No, free disks and dedicated disks can be only used with a mirrored array, striped‐
mirror array, or a RAID 5 array.
• Once a dedicated disk has been assigned to a RAID 1, RAID 0+1, or RAID 5 array, can
I remove it?
Yes, a dedicated disk can be removed from a RAID 1, RAID 0+1, or a RAID 5 array.
Array Migrating Questions
• Is it possible to migrate a single bootable drive to a two‐disk stripe array?
That is, if I have a single drive in the system that is not RAID enabled, then decide to add a
second drive to the system, will I then be able to migrate the single bootable drive to a two‐disk
stripe array?
If ʺRAID Enableʺ in the BIOS RAID Config screen is not enabled when the OS is
installed, it is not possible to convert the SATA boot drive into a multi‐disk bootable
RAID array.
Therefore, if you want to retain the capability to migrate a single SATA boot drive into
a multi‐disk RAID array at a future time, you must perform the OS install onto a single
disk stripe array. You can do this by following the instructions in
“Creating a Bootable
Array” on page 17 and selecting ʺRAID Modeʺ striping and then adding just your
single boot disk. Then install the OS using the F6 install mechanism as described in
Step 3: Install the RAID Drivers .
Later, when you want to migrate the single disk into a multi‐disk RAID array, follow
the instructions in
“Migrating an Array” on page 43 .
• Can I delete an array while it is being migrated?
Yes, but doing so will erase all the data stored on the soon to be migrated array.
• Can I migrate a bootable RAID array?
Yes, you can migrate to and from any supported RAID configuration.