Creating raid arrays, Creating a bootable array, Step 1: enable raid in the system bios – HP ProLiant ML115 Server User Manual
Page 21: Step 2: create a raid array using the raid bios, Step 3: install the raid drivers, Raid a, Reating, Rrays
NVIDIA Corporation
17
C
H A P T E R
C
REATING
RAID A
RRAYS
This chapter provides instructions on creating bootable and non‐bootable RAID arrays.
•
You can configure a RAID array and then install the operating system over it.
•
This is the standard method of using non‐bootable disks in a RAID array.
Creating a Bootable Array
Step 1: Enable RAID in the system BIOS
See
“Enabling RAID in the System BIOS” on page 8
Step 2: Create a RAID array using the RAID BIOS
See
“Creating a RAID Array Using the RAID BIOS” on page 11
Step 3: Install the RAID Drivers
Install the RAID drivers when you install the OS.
1 Create the Driver Disk
The \DriverDisk folder contains driver packages for various Linux distributions.
Choose the correct files under DriverDisk that correspond to the Linux OS that you will
be installing, and copy the files in that folder to a formatted diskette.