HP ProLiant DL320 G5 Server - Manual (Page 27)

Setup 27
If you are installing the server into a telco rack, order the appropriate option kit at the RackSolutions.com
website ( http://www.racksolutions.com/hp ). Follow the server-specific instructions on the website to install
the rack brackets.
Use the following information when connecting peripheral cables and power cords to the server.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into RJ-45 connectors.
Item Description
1 PCI Express expansion slot 2, (optional PCI-X, full-length)
2 PCI Express expansion slot 1, low-profile, half-length
3 Power supply
4 UID button/LED
5 10/100/1000 NIC 2
6 10/100/1000 NIC 1
7 iLO 2 management port
8 Serial connector
9 Keyboard connector
10 Mouse connector
11 Video connector
12 USB connectors (2)
Powering up and configuring the server
IMPORTANT: The F8 key is available only when a supported storage controller is installed in
the server.
To power up the server, press the Power On/Standby button.