Accessing through the telnet interface – HP Surestore 6164 Switch User Manual

Page 19

Text mode
Original mode

Using Remote Switch

Accessing Through the Telnet Interface

You can use the Telnet command

configure

to accomplish the following:

•

Set the R_A_TOV and E_D_TOV values.

•

Set the data field size.

•

Set the Class F frame suppression flag.

You must disable the switch prior to entering the

configure

command.

Example:

switch:admin> configure

Configure. . .

Fabric parameters (yes, y, no, n): [no] yes

Domain: (1. .239) [2]
BB credit: (1. .16) [16]
R_A_TOV: (4000. .120000) [10000]
E_D_TOV: (1000. .5000) [2000]5000
Data field size: (256. .2112) [2112] 2048
Non-SCSI Tachyon Mode: (0. .1) [0]
Disable Device Probing: (0. .1) [0]
Suppress Class F Traffic: (0. .1) [0] 1

In this example, the default value is accepted for R_A_TOV.