HP PrintCalc 100 - Manual (Page 4)

-E3-
File name: HP PrintCalc 100_User's Guide_English_EN_F2227-90001_Edition 1
DATE: 2008/6/24
4. TO USE AC ADAPTER
Note: HP does not offer/provide the AC Adaptor. If the customer chooses
to use the power adaptor, it must meet the specifications
(6V/300mA ,
).
1) Turn the calculator off before connecting or disconnecting the AC
Adaptor.
2) Connect the AC adapter (6V / 300mA ,
) to the power jack.
3) Using anything other than AC adapter (6V / 300mA , ) will
damage the unit and void the warranty.
Equipment Warning
!
WARNING: To reduce the risk of personal injury, electrical shock, fire or
damage to the equipment:
•
Plug the AC adapter into an AC outlet that is easily accessible at
all times.
•
Disconnect power from the equipment by unplugging the AC
adapter from the AC outlet.
•
Do not place anything on the power cord or any of the other
cables. Arrange them so that no one may accidentally step on or
trip over them.
•
Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug or, in the case of the
AC adapter, grasp the AC adapter and pull out from the
electrical outlet.
•
Do not use converter kits sold for appliances to power your
HP Calculator.
5. RESET:
Electromagnetic interference or electrostatic
discharge may cause the display to malfunction or
the contents of the memory to be lost or altered. If
it occurs, use the tip of a ball point pen (or similar
sharp object) to press the [RESET ] button at the
bottom of the battery case.
CAUTION: Risk of explosion if battery is replaced
by an incorrect type. Dispose of used batteries
according to the instructions.
RESET