HP Scanjet Enterprise Flow 7000 s2 Sheet-feed Scanner - Manual (Page 14)

HP Scanner Tools Utility
Use the HP Scanner Tools Utility to configure the list of scan profiles on the scanner front panel, to
create scan profiles that use non-HP scanning software, to change the scanner's power management
settings, and to find information about scanner settings, status, and maintenance.
To open the utility, do one of the following:
● Double-click the HP Scanner Tools Utility icon on the desktop.
● Press the Tools ( ) button on the scanner front panel.
● Click Start, point to Programs or All Programs, point to HP, point to Scanjet, point to 7000 s2,
and then click Scanner Tools Utility.
For more information, see the HP Scanner Tools Utility Help.
HP TWAIN
HP TWAIN allows you to scan using TWAIN-compliant scan software from other (non-HP) vendors. Not
all TWAIN-compliant software works in the same way, so consult the software documentation for details
on how to acquire scans.
Sleep Mode
By default, the scanner will enter Sleep Mode after 15 minutes of inactivity, and will turn off
automatically after two hours of inactivity to conserve power. To change the default sleep and auto-off
settings, complete these steps:
1. Press the Tools ( ) button to start the HP Scanner Tools Utility.
2. Click the Settings tab, and then select the appropriate sleep mode and auto-off settings.
● To specify the period of inactivity after which the scanner goes into Sleep Mode, select 15
minutes or 1 hour from the Sleep: Put the scanner to sleep after: drop-down list.
● To specify the period of inactivity after which the scanner automatically turns off, select the
appropriate value (1 hour, 2 hours, 4 hours, or Never) from the Auto-Off: Turn off
the scanner after: drop-down list.
8 Chapter 1 Product basics ENWW