Power-saver feature – HP x2301 23-inch Diagonal Micro Thin LED Monitor User Manual

Page 24

●

Check Video Cable—Indicates a video input cable is not properly connected to the computer or

monitor.

●

OSD Lockout—The OSD can be enabled or disabled by pressing and holding the Menu button on

the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lockout appears

for 10 seconds. If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the

OSD. If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.

●

Dynamic Contrast Ratio ON—Indicates that DCR is turned on.

●

Dynamic Contrast Ratio OFF—Indicates that DCR has been turned off in the OSD or was

automatically turned off after changes were made to Brightness, Contrast, or Quick View in the

OSD.

●

No Input Signal—Indicates the monitor is not receiving a video signal from the computer on the

monitor video input connector. Verify if the computer or input signal source is off or in the power-

saver mode.

Power-Saver Feature

When the monitor is in normal operating mode, the Power light is blue and the monitor uses the normal

watts of power. For power usage, see the

section.

The monitor also supports a power-saver mode that is controlled by the computer. When the monitor is

in the reduced-power state, the monitor screen is blank, the backlight is off, the Power light is amber,

and the monitor uses minimum power. When the monitor is "awakened," a brief warm-up period

occurs before the monitor returns to normal operating mode. The energy-saving reduced power state

activates if the monitor does not detect either the horizontal sync signal or the vertical sync signal. The

power-saver feature must be activated on your computer for this feature to work.

For instructions on setting energy-saver features (sometimes called power-management features), see

your computer documentation.

NOTE:

The energy-saver feature works only when the monitor is connected to computers that have

energy-saver features.

Chapter 4 Operating the Monitor

ENWW