HP x2301 23-inch Diagonal Micro Thin LED Monitor - Manual (Page 12)

3 Setting Up the Monitor
Unpacking the Monitor
1. Make sure all contents are included. Store the packing box.
2. Turn off the computer and other attached devices.
3. Prepare a flat area to assemble the monitor.
NOTE: Use only the power cord and adapter provided with this monitor.
Connecting Monitor Cables
CAUTION: Before connecting cables to the monitor, ensure that the computer and monitor are
powered off.
The video source is determined by the video cable used. The monitor automatically determines which
inputs have valid video signals. The inputs can be selected by pressing the source button on the front of
the monitor.
Connecting the DVI-D Cable
Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI-D
video connector on the computer. You can use this cable only if your computer has a DVI-compliant
graphics card that is either integrated or installed. The DVI-D cable is provided.
Figure 3-1 Connecting the DVI-D Cable
6 Chapter 3 Setting Up the Monitor ENWW