HP Surestore 6164 Switch - Manual (Page 44)

44 Zoning User’s Guide
cfgDisable
cfgEnable
cfgSave
cfgShow
cfgSave
Save a zone configuration to nonvolatile memory.
Synopsis cfgSave
Availability Administrator
Description Use this command to save the current zone configuration. The defined
configuration and the name of the enabled configuration are written to
nonvolatile memory in all switches in the fabric.
The saved configuration is automatically reloaded by the switch on power
up and, if a configuration was enabled at the time it was saved, the same
configuration is re-installed with an automatic
cfgEnable command.
Because the saved configuration is reloaded at power on, only valid
configurations are saved. The
cfgSave command verifies that the enabled
configuration is valid by performing the same tests as cfgEnable . If the
tests fail, an error is displayed and the configuration is not saved. Tests can
fail if a configuration has been modified since the last
cfgEnable .
Operands None
Example To save a zone configuration enable it, and then save it:
sw5:admin> cfgEnable "USA_cfg"
zone config "USA_cfg" is in effect
sw5:admin> cfgSave
Updating flash...