HP Surestore 6164 Switch - Manual (Page 29)

29
A
ZONING TELNET COMMANDS
To use a Telnet command, log in with administrative privileges to any
switch in the fabric, enter the command with required operands, if any, and
press Enter. Changes made to the zoning configuration on one switch are
replicated through all switches within the fabric.
Note When accessing the switch using simultaneous multiple connections
(Telnet and Web Tools), it is possible that a change resulting from one
connection might not transfer to another connection. Also, it is possible that
a change from one connection could over-write a change from another
connection. Therefore, use care when making changes using simultaneous
sessions.
Table 1 lists the Telnet commands used to administer Zoning. The
commands are grouped by function.