Zr2740w model preset modes, Energy saver feature – HP ZR2740w 27-inch LED Backlit IPS Monitor User Manual
Page 42

Table A-4
ZR2440w High Definition Video Formats (continued)
13
1080p25
1920 x 1080
28.125
25
74.250
33
1080p-25Hz
14
1080p29.97
1920 x 1080
33.750
30
74.250
34
1080p-30Hz
ZR2740w Model Preset Modes
Preset
Pixel Format
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
1
640 x 480
31.468
59.9
2
1280 x 720
44.771
59.8
3
2560 x 1400
88.786
59.9
Energy Saver Feature
In addition to normal operating mode, your monitor has a low-power, or "sleep" mode that uses less
than .5 watts and from which it will awaken with any signal input. The monitor will go to sleep
automatically when it stops receiving input, so putting your computer on a timer is one way to put the
monitor on a timer. Some models also have their own sleep timers. The power LED on the front panel
indicates the monitor's state: blue under full power, amber in sleep mode, and blinking amber on a
sleep timer.
NOTE:
If your monitor has a master power switch (located on the rear of the monitor), putting the
switch in the Off position will yield the lowest power state for the monitor when not in use.
36
Appendix A Technical Specifications