HP Integrity NonStop H-Series - Manual (Page 55)

Installing the Fibre Channel to SCSI Router for the
Versatile I/O Enclosure
M8201R Fibre Channel to SCSI Router Installation and User’s Guide — 529971-006
D- 5
Installation
6. Tighten the screws by hand to secure the cable to the unit. Do not use a
screwdriver.
7. Connect the supplied differential terminator to SCSI port 2. See Figure D-5 on
page D-4 for the location.
8. Tighten the screws by hand to secure the terminator to the tape drive. Do not use a
screwdriver.
9. Attach the power cord to the AC power receptacle on the tape drive. See
Figure D-5 for the location. Then plug the other end into an AC power outlet.
10. Connect the other end of the fiber cable to a Fibre Channel port on the Versatile
I/O Enclosure.
For more information on the Versatile I/O Enclosure, see the Versatile I/O Manual.
The fiber cable is a multimode/short wave fiber-optic cable. This cable is normally
an orange color.
Note. The tape drive does not have protection against lightning surges. Customers in high risk
areas should use external surge protection rated for use in their location and be able to handle
the power demand of the tape drive.
Figure D-6. Rear View of Versatile I/O Enclosure
Connect the fiber cable to any of the Fibre Channel
ports in Slot 1 or Slot 7c.