Figure 4-1, Rear view of the fibre channel router – HP Integrity NonStop H-Series User Manual

Page 32

Configuring the Fibre Channel to SCSI Router for
the NonStop NS-Series Server

4 -2

Configuration

2. To start the tape drive on the server, issue this command in SCF:

SCF> START TAPE $tape

Example:

SCF> START TAPE $TAPE1

For complete details about the ADD and START commands, including command
syntax, see the SCF Reference Manual for the Storage Subsystem.

Figure 4-1. Rear View of the Fibre Channel Router

Note. WWN stands for worldwide name.

Note. WWP stands for worldwide port.

WWNN: 100000E00200F000
WWPN: 100000E00C00F000
ENET MAC ID: 00:E0:02:00:00:XY

WWN Name
WWP Name
Ethernet MAC ID
(Physical Address)