HP Photosmart 8750 Professional Photo Printer - Manual (Page 55)

Solution Always extend the Out tray extension when you print.
The printout is rippled or curled
Solution The project you are printing uses a larger amount of ink than normal.
Print the project from a computer, and use the printer software to lower the ink
saturation level. See the onscreen HP Photosmart Printer Help for more
information.
The document printed at an angle or is off-center
Solution
●
The paper may not be loaded correctly. Reload the paper, making sure it is
correctly oriented in the Main tray and that the paper-width and paper-length
guides fit close to the edges of the paper. For paper-loading instructions, see
Loading your paper .
● The printer may need to be calibrated. For more information, see Aligning the
print cartridges .
Colors are not printing satisfactorily
Solution
●
You may not be using the best print cartridges for the project. For more
information, see
Inserting print cartridges .
● You may be printing in Ink-Backup Printing Mode. The printer enters Ink-
Backup printing mode when one of the print cartridges is missing. Replace
the missing cartridge.
● A cartridge is out of ink. Replace it.
● Some of the ink nozzles on a cartridge are clogged. Clean the cartridges.
See
Automatically cleaning the print cartridges .
● The color management settings of the printer may not be set properly. For
more information, see
Using color management .
No page came out of the printer or the paper jammed while printing
Solution
●
The printer may need attention. Read the printer screen for instructions.
● The power may be off or there may be a loose connection. Make sure the
power is on and the power cord is securely connected.
HP Photosmart 8700 series User's Guide 51