beautypg.com

HP EliteBook 755 G2 Notebook PC User Manual

Page 88

background image

To specify a boot device from the Express Boot menu, select your preference within the allotted

time, and then press

enter

.

To prevent the computer from defaulting to the current MultiBoot setting, press any key before

the allotted time expires. The computer will not start until you select a boot device and press

enter

.

To allow the computer to start according to the current MultiBoot settings, wait for the allotted

time to expire.

Using HP PC Hardware Diagnostics (UEFI) (select models

only)

HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run

diagnostic tests to determine if the computer hardware is functioning properly. The tool runs outside

of the operating system to isolate hardware failures from issues that may be caused by the operating

system or other software components.
To start HP PC Hardware Diagnostics UEFI:

1.

Turn on or restart the computer, quickly press

esc

, and then press

f2

.

After pressing

f2

, the BIOS searches three places for the HP PC Hardware Diagnostics (UEFI)

tools in the following order:
a.

Connected USB drive

NOTE:

To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 78

.

b.

Hard drive

c.

BIOS

2.

Use the keyboard arrow keys to select the type of diagnostic test you want to run, and then

follow the on-screen instructions.

NOTE:

If you need to stop a diagnostic test while it is running, press

esc

.

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

NOTE:

The HP PC Hardware Diagnostics (UEFI) download instructions are provided in English

only.

1.

Go to

http://www.hp.com

.

2.

Point to Support, located at the top of the page, and then click Download Drivers.

3.

In the text box, enter the product name, and then click Go.
– or –
Click Find Now to let HP automatically detect your product.

4.

Select your computer model, and then select your operating system.

5.

In the Diagnostic section, click HP UEFI Support Environment.
– or –
Click Download, and then select Run.

78 Chapter 12 Computer Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI)

This manual is related to the following products: