HP ProLiant BL685c Server-Blade - Manual (Page 38)

Cabling 38
Numerous configurations are possible. This section offers two possible configurations. For more
information, see "USB support and functionality (on page 52 )."
Accessing a server blade with local KVM
CAUTION: Before disconnecting the local I/O cable from the connector, always squeeze the release
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
NOTE: For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
1. Connect the local I/O cable to the server blade.
2. Connect the video connector to a monitor.
3. Connect a USB mouse to one USB connector.
4. Connect a USB keyboard to the second USB connector.
Item Description
1 Monitor
2 USB
mouse
3 Local I/O cable
4 Server blade
5 Video connector
6 USB keyboard
Accessing local media devices
Use the following configuration when configuring a server blade or loading software updates and
patches from a USB CD/DVD-ROM or a USB diskette.
1. Connect the local I/O cable to the server blade.
2. Connect the video connector to a monitor.
3. Connect a USB hub to one USB connector.
4. Connect the following to the USB hub:
• USB CD/DVD-ROM drive