beautypg.com

HP StoreFabric Converged Network Adapters User Manual

Page 8

background image

Installing an adapter 8

To install a low profile bracket:

1.

To remove any SFP transceivers or cables from the CNA transceiver cage assembly, pull the bail
(handle) out and down to release the latch.

2.

Gently pull the SFP transceiver out. Store the transceiver in an ESD-safe place.

3.

Using a correctly sized slotted screwdriver, carefully remove the two board lock screws located at the
top and bottom of the connector.

See also other documents in the category HP Storage: