Software and configuration utilities, Server mode, Hp product quickspecs – HP ProLiant BL460c Gen8 Server Blade User Manual
Page 46: Hp ilo management engine, Hp ilo
Software and configuration utilities 46
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or in
both modes.
Software or configuration utility
Server mode
Online and Offline
Online and Offline
Integrated Management Log (on page
Online and Offline
Intelligent Provisioning (on page
Offline
HP Insight Diagnostics (on page
Online and Offline
Offline
Online
HP Service Pack for ProLiant (on page
Online and Offline
HP Smart Update Manager (on page
Online and Offline
HP ROM-Based Setup Utility (on page
Offline
Array Configuration Utility (on page
Online and Offline
Option ROM Configuration for Arrays (on page
Offline
Offline
HP product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website
.
HP iLO Management Engine
The HP iLO Management Engine is a set of embedded management features supporting the complete
lifecycle of the server blade, from initial deployment through ongoing management.
HP iLO
The HP iLO subsystem is a standard component of selected HP ProLiant servers that simplifies initial server
blade setup, server health monitoring, power and thermal optimization, and remote server administration.
The HP iLO subsystem includes an intelligent microprocessor, secure memory, and a dedicated network
interface. This design makes HP iLO independent of the host server and its operating system.
HP iLO enables and manages the Active Health System (on page
) and also features Agentless
Management. All key internal subsystems are monitored by HP iLO. SNMP alerts are sent directly by HP iLO
regardless of the host operating system or even if no host operating system is installed.