HP ProLiant BL460c Gen8 Server Blade - Manual (Page 40)

Hardware options installation 40
9. Install the TPM board. Press down on the connector to seat the board (" System board components " on
page 8 ).
10. Install the TPM security rivet by pressing the rivet firmly into the system board.
11. Install the front panel/drive cage assembly.
12. Install the SAS controller (on page 15 ).
13. Install the DIMM baffle.
14. Install the access panel (on page 13 ).
15. Install the server blade (" Installing a server blade " on page 20 ).
16. Power up the server blade (on page 11 ).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system
integrity.