Select servers, Select the source machine, Chapter 5 select servers -1 – HP Storage Mirroring V5.1 Software User Manual
Page 11: Select the source machine -1
5 - 1
Select servers
The Protect a server workflow guides you through all the steps to
protect the physical source server whose data and system state you
will be protecting with a virtual target server.
Select the source machine
When you click
Protect a server or select Go, Protect a server, the Select source server window
will appear.
Enter the following information for the source server:
1.
Server—Enter the IP address or DNS name of the source server you want to protect. Or, click
the
Browse
button to browse to locate a server.
a.
In the
Browse for server window, browse through the server tree to select a source server.
b.
After you have found the source server, select it, then click
Choose.
NOTE:
In order to protect a source, the source must have no more than four NICs enabled.