HP ProLiant DL980 G7 Server User Manual
Page 30
IMPORTANT:
HP highly recommends that you run data collection and complete the process
before visiting or modifying the Optimization pages. To ensure suitability of HP ESO’s optimization
recommendations, perform data collection during typical business workloads.
HP ESO optimization pages typically display the following values or controls (see
):
•
N/A
⇒ No recommendation can be provided for the parameter at the current state and
environment.
•
Current
⇒ The current parameter value discovered in the system.
•
Recommended
⇒ The parameter value recommended by HP ESO.
•
New Value
⇒ This field contains the new parameter value to be applied to the system. By
default, this field contains the recommended value. However, you can change this value if
desired.
•
SET ALL
⇒ Sets all of the parameters shown in the New Value field on the page. Click this
button to make the changes take effect immediately. Changes requiring a system or SQL Server
service restart are indicated after the changes are applied.
•
SET
⇒ Sets the specific parameter shown beside it. Click this button to make the change take
effect immediately. Changes requiring a system or SQL Server service restart are indicated
after the change is applied.
•
Enable Parameter Change check box (alongside each parameter name)
⇒ When checked,
allows the corresponding parameter to be changed. When unchecked, the parameter retains
its current value after clicking SET or SET ALL.
•
Select/Unselect All check box
⇒ When checked, causes the parameter changes enablement
check boxes under its section to toggle between Selected and Unselected.
•
Expand (
) and Collapse (
)
⇒ Expand or Collapse a section in a page.
•
Show Recommendation Details check box
⇒ Shows details of all recommendations, as shown
in
. The details are listed under the parameter setting area.
Figure 28 Show Recommendation Details page
When a critical error occurs, the Optimizations page displays possible steps that can be taken,
as shown in
.
30
Using HP ESO