HP StorageWorks 2.140 Director Switch - Manual (Page 156)

Zoning 154
The Deactivate Zone Set dialog box is displayed ( Figure 95 ).
Figure 95 Deactivate Zone Set dialog box
The dialog box shows the names of the active zone set, and shows the new active zone set as
none
. Verify the information in this dialog box.
3. Click OK.
The active zone set and its zones are deactivated.
NOTE: If the default zone is enabled and the active zone set is deactivated, members of the zone
can still be able to communicate.
Enabling and disabling the default zone
By enabling the default zone, the potential zone members that are not in zones can see all other
potential members that are not in zones.
To enable the default zone:
1. Display the zone library. See ” Displaying the zone library ” on page 149.
The Zoning dialog box is displayed ( Figure 91 on page 149).
2. Select the fabric for which you want to enable the default zone.
3. Enable the default zone by selecting Default Zone.
4. Click OK.