HP Integrity NonStop J-Series - Manual (Page 64)

Specifications
M8605A and M8606A ACL Tape Drive Installation and User’s Guide — 546012-002
A- 2
Power
Power
Voltage Limits
The tape drive is capable of using any nominal AC voltage between 100 and 240VAC
power, at 50 or 60 Hz. The machines are capable of powering up and operating without
error from any voltage within the ranges specified:
Frequency Limits
The tape drive is capable of operation at either 50Hz or 60Hz. The machines will
automatically adjust for 50-60Hz primary power operation, without requiring user
intervention or modification.
Power Requirements
The tape drive exhibits a nominal steady state AC power consumption of 192 watts,
and a maximum peak power consumption of 240 watts.
Technical Specifications
This table lists technical specifications for the tape drive.
Table A-2. Power for Tape Drive
Input voltage 100-240 Vac +/- 10% full range
Input frequency 50 - 60 Hz
Input current 1.6 A (Max)
Table A-3. Technical Specifications
Tape format Ultrium generation 4
Tape media Read/Write Ultrium 3/4, Read only Ultrium 2
Cartridge capacity 800 gigabytes native; up to 1.6 terabytes compressed
Data transfer rate Up to 120 megabytes per second native
Up to 240 megabytes per second compressed
Buffer size 128 megabytes
MTBF 250,000 hours
Data access time 53 seconds from beginning of media (average)
Rewind tape speed 7 m/s
Interface Multimode short wave fiber-optic
Plug type LC/LC