5 maintenance, Manually running a cleaning cartridge, Running a cleaning cartridge from the mail slot – HP Integrity NonStop J-Series User Manual
Page 47: Maintenance, Figure 5-1, Cleaning cartridge in mail slot
M8605A and M8606A ACL Tape Drive Installation and User’s Guide — 546012-002
5 -1
5
Maintenance
This section includes:
Manually Running a Cleaning Cartridge
A cleaning cartridge can be installed and run from the mail slot or any data cartridge
slot using the following procedures.
Running a Cleaning Cartridge from the Mail Slot
1. Place a cleaning cartridge into the mail slot.
2. From the GUI screen, press Menu > Maintenance > Clean Drive.
3. Press the Source field and then press Mail Slot
4. Press the Cleaning field and then press Drive in the Destination Element Type.
5. Press Execute Clean.
Manually Running a Cleaning Cartridge
Note. Cleaning should only be done when the ACL unit displays a message informing you that
cleaning is needed.
Figure 5-1. Cleaning Cartridge in Mail Slot