HP ProBook 5220m Notebook PC - Manual (Page 49)

10. Pull up the hard drive tab (3), and then lift the hard drive out of the service access bay.
To install a hard drive:
1. Pull up the hard drive tab (1) and insert the hard drive into the service access bay.
2. Tighten the 3 hard drive screws (2).
3. Connect the hard drive connector cable (3).
4. Align the tabs on the service access door (1) with the notches in the service access bay, and replace
the door.
5. Press down on the door (2) until the until the release latch (3) clicks.
Replacing a hard drive 41