HP LaserJet 9000 Printer series - Manual (Page 31)

ENWW Using the stapler 31
Loading the stapler
cartridge
The message STAPLER LOW ON STAPLES
appears on the printer control panel if
the stapler cartridge has 20 to 50 staples
remaining. The message
STAPLER OUT
OF STAPLES appears on the printer
control panel if the stapler cartridge
contains no more staples.
To load the stapler cartridge
1 Open the stapler-unit door.
2 Slide the stapler unit toward you.
3 Turn the large green knob until you
see the blue dot (this indicates that
the stapler is fully open).
4 Turn the small green knob at the top
of the stapler unit clockwise until the
staple cartridge moves to the left of
the stapler unit.
CAUTION
The blue dot must appear in the window
of the stapler unit before you remove the
staple cartridge. If you try to remove the
staple cartridge before the blue dot
appears in the window, you could
damage the device.
2
3
4
1