HP OmniBook 3000 Notebook PC - Manual (Page 19)

Using the Port Replicator
Making Connections
1-19
To use the monitor stand with an external display
The optional monitor stand (HP F1369A), can support a weight of 69 kg (151.8 lb.).
When setting up the monitor stand, be sure that the wide edge faces forward, as
shown below.
To enable the built-in and external displays
•
Press Fn+F5 to cycle through the external and built-in display options (Internal,
External, Both).
--or--
1. Close all applications, then shut down Windows and reboot the OmniBook. If
necessary, you can press CTRL+ALT+DEL to reboot.
2. When you see the following message, press F2 to enter Setup.
Press to enter Setup
3. From the Main menu, use the down arrow to highlight Video Display Device.
4. Press Enter to view choices.
5. Select Both.
6. Press F10 to save settings and exit Setup.