HP OmniBook 3000 Notebook PC - Manual (Page 16)

Using the Port Replicator
Making Connections
1-16
To connect a PS/2 mouse
The OmniBook has a PS/2 mouse driver installed. When you dock, the OmniBook
automatically detects and sets up the mouse.
1. Attach the mouse cable to the mouse port.
2. Dock the OmniBook in the port replicator.
To switch back to the internal TouchPad
Use this procedure to switch back to the built-in TouchPad from an external PS/2
mouse while docked.
1. Press the power button to suspend the OmniBook
2. Disconnect the mouse cable from the port replicator.
3. Press the power button to resume.
--or--
Undock, disconnect mouse, then dock again.
Mouse port