Wrong original was copied, Too light or dark, Unwanted lines – HP LaserJet 3380 All-in-One Printer User Manual
Page 138: Black dots or streaks, Unclear text, Reduced size
Wrong original was copied
●
Make sure that the automatic document feeder (ADF) is empty.
Too light or dark
●
Try adjusting the settings.
●
Make sure that the copy-quality settings are correct. See
for
more information.
Unwanted lines
●
Make sure that the priority input tray is in place.
●
Try cleaning the flatbed scanner. See
Cleaning the outside of the device
for instructions.
●
The photosensitive drum inside the print cartridge might be scratched. Install a new HP
print cartridge. See the start guide for information about installing a print cartridge.
Black dots or streaks
●
Ink, glue, correction fluid, or another unwanted substance might be on the automatic
document feeder (ADF) or flatbed scanner. Try cleaning the device. See
Unclear text
●
Try adjusting the settings.
●
Make sure that the copy-quality settings are correct. See
for
more information.
●
See the device software Help for more information about changing the settings.
Reduced size
●
The software settings might be set to reduce the scanned image.
●
See the HP toolbox Help for more information about changing the settings.
126
Chapter 8 Troubleshooting
ENWW