HP 256 G3 Notebook PC - Manual (Page 36)

Connecting video devices by using a VGA cable (select models only)
To see the computer screen image on an external VGA monitor or projected for a presentation,
connect a monitor or projector to the computer's VGA port.
To connect a monitor or projector:
1. Connect the VGA cable from the monitor or projector to the VGA port on the computer as
shown.
2. Press f4 to alternate the screen image between 4 display states:
● PC Screen only: View the screen image on the computer only.
● Duplicate: View the screen image simultaneously on both the computer and the external
device.
● Extend: View the screen image extended across both the computer and the external
device.
● Second screen only: View the screen image on the external device only.
Each time you press f4 , the display state changes.
NOTE: For best results, especially if you choose the "Extend" option, adjust the screen
resolution of the external device, as follows. From the Start screen, type control panel, and
then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust
screen resolution.
26 Chapter 4 Enjoying entertainment features