HP ProLiant DL385 G5 Server - Manual (Page 52)

Hardware options installation 52
3. Remove the access panel (on page 22 ).
4. Remove the PCI riser cage (on page 25 ).
5. Remove the expansion slot cover.
Installing an expansion board (slot 3, 4, or 5)
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser cage.
1. Power down the server (on page 21 ).
2. Extend the server from the rack (on page 21 ).
3. Remove the access panel (on page 22 ).
4. Remove the PCI riser cage (on page 25 ).
5. Remove the expansion slot cover (" Removing an expansion slot cover (slot 3, 4, or 5) " on page 51 ).
6. Unlock the PCI retaining clip.