HP ProLiant DL385 G5 Server - Manual (Page 44)

Hardware options installation 44
IMPORTANT: Always install memory in pairs of two identical DIMMs.
6. Install the DIMM.
7. Install the air baffle (on page 24 ).
8. Install the access panel (on page 23 ).
9. Install the server into the rack.
10. Power up the server (on page 21 ).
For more information about LEDs and troubleshooting failed DIMMs, see "Systems Insight Display LEDs
and internal health LED combinations (on page 14 )."
Hot-plug SAS hard drive options
When adding hard drives to the server, observe the following general guidelines:
• The system automatically sets all device numbers.
• If only one hard drive is used, install it in the bay with the lowest device number.
• Hard drives must be SFF types.
• Drives should be the same capacity to provide the greatest storage space efficiency when drives are
grouped together into the same drive array.