HP StorageWorks 2.32 Edge Switch - Manual (Page 131)

HA-Fabric Manager user guide 131
The Activate Zone Set dialog box appears ( Figure 80 )
.
Figure 80 Activate Zone Set dialog box
4. Verify the information and click OK.
A confirmation message appears (
Figure 81 ).
Figure 81 Activate Zone Set confirmation message
5. Click Yes to continue.
The Zoning dialog box appears.
6. Click the Active Zone Set tab to view the active zone set and its zones.
Verify that the switch is being managed properly.
NOTE: Only one appliance should perform discovery at a time; otherwise logon conflicts may
occur.
7. Click OK.
Deactivating a zone set
To deactivate a zone set:
1. Display the zone library. (See “Displaying the zone library” on page 177.)
The Zoning dialog box appears (
Figure 78 ).
2. Click Deactivate.