HP OmniBook 4150 Notebook PC User Manual
Page 30
Using the Dock
1EOMRK 'SRRIGXMSRW
1-30
To enable the built-in and external displays
•
Press Fn+F5 (Ctrl + Alt + F5 if using an external keyboard) to cycle through the
external and built-in display options (Internal, External, Both).
—or—
1. Close all applications, then shut down Windows and reboot the OmniBook..
2. When you see the HP OmniBook logo displayed,
4VIWW *" XS IRXIV 7IXYT
3. From the Main menu, use the down arrow to highlight Video Display Device.
4. Press Enter to view choices.
5. Select Both.
6. Press F10 to save settings and exit Setup.
To connect a parallel device
Use standard parallel cables and adapters available at computer dealers and
electronic supply stores to connect parallel devices.
,MRX
The floppy drive provided with some OmniBook models can be connected
externally through the parallel port using an optional floppy/parallel cable.
1. Attach the parallel cable to the parallel port.
2. Dock the OmniBook pc in the dock.
3. If necessary, install your parallel device driver.
See your Windows or device manual for instructions.