AMD GA-MA69VM-S2 - Manual (Page 35)

BIOS Setup - 35 -
English
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is
40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that
BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all 80 tracks.
Disabled BIOS will not search for the type of floppy disk drive by track number. Note that
there will not be any warning message if the drive installed is 360K. (Default
value)
Password Check
System The system can not boot and can not access to Setup page will be denied if the
correct password is not entered at the prompt.
Setup The system will boot, but access to Setup will be denied if the correct password
is not entered at the prompt. (Default value)
HDD S.M.A.R.T. Capability
This feature allows your hard disk to report read/write errors and to issue warnings when third-
party hardware monitor utility is installed.
Enabled Enable HDD S.M.A.R.T. capability.
Disabled Disable HDD S.M.A.R.T. capability.(Default value)
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.
PEG Set Init Display First to PCI Express VGA card.
PCI Slot Set Init Display First to PCI VGA card. (Default value)
OnChip VGA Set Init Display First to onboard VGA.
Surroundview
This option is configurable only if an ATI graphics card is installed.
Disabled Disable the Dual-View capability. (Default value)
Enabled Enable the Dual-View capability.
Internal Graphics Mode
Auto Enable output from the onboard GPU when no PCI Express card is installed.
When a PCI Express card is installed, automatically output from the PCI Ex-
press card and disable the onboard GPU.(Default)
Disabled Disable the onboard GPU, whether or not a PCI Express card is installed.
Frame Buffer Size
Auto Auto-detect frame buffer size.(Default value)
32MB Set frame buffer size to 32 MB.
64MB Set frame buffer size to 64 MB.
128MB Set frame buffer size to 128 MB.
256MB Set frame buffer size to 256 MB.
512MB Set frame buffer size to 512 MB.
1024MB Set frame buffer size to 1024 MB.
Current UMA Size
Detect UMA size automatically.