HP Integrity NonStop H-Series - Manual (Page 28)

1. Download the $SYSTEM.ZNSSSL.PROXYEXE file in binary format and rename it to
PROXY.EXE
.
2. Run PROXY.EXE to start the RemoteProxy installation program, and follow the installation
instructions in the wizards.
3. Double-click the NonStop SSL RemoteProxy icon in your system tray. The RemoteProxy
configuration window is displayed.
4. Select Session –> New. The HP NonStop SSL RemoteProxy dialog is displayed.
1.
Select ODBCMX Client in the Protocol menu.
2. Enter the IP address or host name of the system where the MXCS Association Server
process is running, in the Target Information field.
3. Enter the port number of the SSL server in the Target (Connecting) Port field. For
example, 8402.
4. Enter the port number of the MXCS Association Server in the Local (Accepting)
Port
field.
5. Click Start to start the Remote Proxy session.
6. Check the startup messages to verify that the Remote Proxy session started successfully.
Configuring a client data source for NonStop SSL
Perform the following steps to configure a client data source on your workstation:
1.
Select Start -> Control Panel -> Administrative Tools -> Data Sources
(ODBC)
.
2. Click either the System DSN or the User DSN tab to get the list of data sources.
3. Select the data source name that you want to configure and click Configure.
4. Change the MXCS IP Address in Network tab to localhost in the screen shot after table
3.
5. Go to Testing tab and click Test Connection to test the connection. Upon successful connection,
Connected Successfully
message is displayed.
28 Configuring data sources