HP Integrity NonStop H-Series - Manual (Page 18)

1. Download the driver from NonStop system to the HP–UXia64 workstation in binary mode
(You can use FTP utility for downloading). The driver is packaged as a tar file in the
Software Update Tape (SUT) and is available on the NonStop system when DSM/SCM
is used to install the SUT. The file name is ODBC64HI, and is located in the volume
$SYSTEM.ZMXODBC
.
2. Log on to the HP–UXia64 workstation as a root user.
3. Go to download directory, and enter the following command to extract the files:
tar -xvf ODBC64HI
The files are extracted to HPUXia64_ODBC_64 directory. The install scripts and the
README file are also extracted with the driver.
4. Go to the HPUXia64_ODBC_64 directory.
5. To start the installation, enter the following command:
./runme.sh
6. Enter 1 and press Enter. If you have already installed the driver, a warning message
appears.
The library files are installed in the /usr/lib/hpux64 directory and a sample MXODSN file
is copied to the /etc/mxodbc directory. Upon successful installation, the following message
is displayed:
Installed !
Linux 32
Perform the following steps to install the driver:
1.
Download the driver from NonStop system to the Linux workstation in binary mode (You
can use FTP utility for downloading). The driver is packaged as a tar file in the Software
Update Tape (SUT) and is available on the NonStop system when DSM/SCM is used to
install the SUT. The file name is LODBCTAR, and is located in the volume
$SYSTEM.ZMXODBC
.
2. Log in to the Linux workstation as a root user.
3. Go to download directory, and enter the following command to extract the files:
tar -xvf LODBCTAR
The files are extracted to Linux_ODBC_32 directory. The install scripts and the README
file are also extracted with the driver.
4. Go to the Linux_ODBC_32 directory.
5. To start the installation, enter the following command:
./runme.sh
6. Enter 1 and press Enter. If you have already installed the driver, a warning message
appears.
The library files are installed in the /usr/lib directory and a sample MXODSN file is copied
to the /etc/hpodbc directory. Upon successful installation, the following message is displayed:
Installed !
Linux 64
Perform the following steps to install the driver:
1.
Download the driver from NonStop system to the Linux workstation in binary mode (You
can use FTP utility for downloading). The driver is packaged as a tar file in the Software
Update Tape (SUT) and is available on the NonStop system when DSM/SCM is used to
install the SUT. The file name is LODBC64, and is located in the volume
$SYSTEM.ZMXODBC
.
2. Log in to the Linux workstation as a root user.
18 Installing the drivers