HP Integrity NonStop H-Series - Manual (Page 136)

Library Media Manager Quick Start Guide
Library Media Manager Installation and User’s Guide— 529970-001
A- 6
E-mail Version of LMM Software (Client)
E-mail Version of LMM Software (Client)
If you have LMM CLIENT systems (NonStop systems with tapedrives in the library, but
that the library control path is not physically attached to), you can unzip the client zip
file to another directory on your PC, and use the GUI to place those files on the client
systems. They configure the same way.
1. On the LMM CLIENT systems, do the following:
2. RUN CONFIG to create a new configuration file. You will have to give it a
password (this the password that will allow access to LMM).
3. Type in CONFIG_HOMETERM and enter a home terminal (normally $ZHOME on
the NonStops)
4. Type in CONFIG_HOSTPORT# and choose the port number you configured on the
server. This is the port that the client will use to communicate with the server
through.
5. Type in CONFIG_CLNTPORT# and choose a port number that is at least 10 away
from the SERVER port number
6. OBEY your LMM CLIENT STARTUP FILE
Example A-3. Client STARTUP File
clear all
param tcpip^process^name $zb01a
run $system.tsilmmc.tsilmmc0/name $LMMC, nowait, pri
190, term $zhome, out $zhome, CPU 0/
Example A-4. Configured LMM CLIENT CONFIG Program
TSI-> view_config
DEVICE CONFIGURATION:
------------------------
CLIENT PORT#: 9876
HOST PORT#: 6001
HOST IP ADDRESS: 192.168.1.99
HOME TERM: $ZHOME