HP EliteBook 8770w Mobile Workstation - Manual (Page 100)

b. Release the keyboard by pressing down on the back of the keyboard in the fan area (2).
CAUTION: To prevent damaging the fan and keyboard, do not use excessive force when
pressing on the keyboard and avoid contact with the fan blades. Also, be sure and use a
screwdriver that will fit comfortably between the fan blades when performing this procedure.
c. Turn the computer right-side up, lift the top edge of the keyboard, and then rest the
keyboard on the TouchPad.
NOTE: Do not disconnect the keyboard cable. To avoid disconnecting the keyboard
cable, do not pull the keyboard away from the computer.
7. If you are replacing a memory module, remove the existing memory module:
a. Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
88 Chapter 10 Maintenance