HP ProBook 655 G1 Notebook PC - Manual (Page 64)

6. Loosen the 4 hard drive screws (1). Slide the hard drive (2) forward , and then remove the hard
drive (3).
Installing a hard drive
NOTE: Your computer may look slightly different from the illustration in this section.
To install the hard drive:
1. Insert the hard drive into the hard drive bay at an angle (1), and then pull the plastic tab (2)
towards the center of the computer to engage the hard drive with the connector.
2. Tighten the hard drive screws (3).
54 Chapter 8 Drives